BRT 16" OPTIMUM Light Barrel
BRT OPTIMUM Light Profile
The BRT OPTIMUM profile combines art and science to maximize performance. While its smooth transitions and gentle tapers are organically inspired, the end result is backed by extensive analysis, design and testing. The profile is thicker near the throat for better heat resistance and uniform thermal performance, tapering toward the muzzle to reduce weight and improve balance. The handguard cap shoulder is eliminated from the .625" diameter gas block journal, which is dimpled for simple installation of a BRT MicroPin gas block. The end result is a lightweight, fast handling barrel with improved consistency across various loads and firing schedules.
BRT Extended Length Gas System
The BRT extended length gas system was created to allow optimum performance from 16" barrels. The gas system length controls the timing of the gas cycle and overall gas drive available. Existing gas systems, while functional, don't offer the balance of factors to allow exceptionally smooth cycling with maximum reliability. The BRT design balances these factors to optimize gas system performance under extreme conditions.
The BRT extended length gas system is longer than the standard mid-length, but shorter than the Noveske Intermediate length, which was designed for use with 18" barrels. The BRT EXT length gas tube is included.
BRT barrels are designed to work best with full pressure 5.56 ammunition and the following buffer systems: VLTOR A5H2, Rifle and Carbine H2.
Suppressor Ready 1/2-28" Muzzle Thread
Precision cut threads are specified to a tighter tolerance and better bore alignment than standard threads, while maintaining compatibility with all common muzzle devices.
5R Rifling 1/8 Twist
5R rifling improves upon conventional rifling in two important ways. The odd number of lands and grooves produces less bullet deformation allows better exterior ballistics. In addition, the sides of the lands are sloped and blended to reduce fouling and further reduce bullet jacket stress. The optimized land-groove ratio minimizes engraving forces while boosting projectile velocity.
The 1/8 twist rate stabilizes the heaviest projectiles in extreme environments, while producing excellent performance from lighter training and varmint projectiles.
4150 CrMoV Barrel Steel
This is the same grade of steel specified by the
BRT barrels are treated inside and outside with the corrosion and wear resistant QPQ process. More than a surface finish, this treatment converts the outer surfaces of the steel into a hard composition with similar properties to hard chrome plating, but without any dimensional changes. This new surface improves extraction and velocity while resisting fouling and corrosion.
5.56 NATO chamber
This allows maximum compatibility wits all commonly available ammunition types, including military 5.56, brass cased .223 and steel cased .223. A properly dimensioned 5.56 NATO chamber offers maximum reliability and ammunition compatibility, while giving up almost nothing compared to SAAMI .223 Remington or .223 Wylde chambers.
M4 Barrel Extension
This includes enlarged and lengthened feed ramps to ensure smooth feeding of all ammunition types. The barrel extensions are black oxide finished separately from the barrels during their QPQ process to ensure critical heat treatments are unaffected. They are later rejoined during final assembly, ensuring excellent longevity and performance.
Magnetic Particle Inspection
This process is used to detect any defects in the barrel structure that could affect performance of this critical component. Each barrel is individually inspected and must pass 100% to meet our quality specifications.